Ok, so I wanted to wrap the JeeHub prototype into some sort of enclosure…
Yeah, why not, a cardboard box.
Got a couple of these from SparkFun, from whom I’ve ordered a few times. The fit is very tight:
And all connectors come out on one side:
From left to right:
- Access to the FTDI connector of the JeeNode
- The ethernet port of the MMnet1001 Linux module
- A mini USB plug, only used to supply power
- DC power, has to be between 5 and 6 volt
In normal use, only the Ethernet and USB ports are hooked up. But even without anything connected, the JeeNode will continue to receive and log data packets (once I finish the dataflash code, that is).