Computing stuff tied to the physical world

Switching AC

In Hardware on Apr 16, 2009 at 00:01

Got myself a couple of these relays from Pollin, for less than the coin next to it:

Bi-stable relay

They can switch 220V @ 16A, and work at 3V. The specialty is that this relay is bi-stable, IOW there are two 15 Ω coils and you send a short pulse through either of them to switch to the corresponding position. So it takes some power to switch, but after that the relay keeps its last position without power. Like a mechanical switch.

It does take some 200 mA – briefly – to switch, so the power supply has to be up to that.

My plan is to connect this to a JeeNode as follows:

Picture 3.png

Probably using a pair of BC547 transistors and 1N4148 diodes (or maybe a ULN2803, to control up to 4 relays). That way, each port would be able to drive one relay. A pretty cheap solution to control any 220 V appliance.

Haven’t decided yet how far to go into actual AC control, since the other option is to use off-the-shelf RF-controlled switches, such as the Conrad/ELV FS20 868 MHz series or the cheap KAKU 433 MHz switches. But relays can be more secure, if some encryption is added to the RF12 driver.

Fun note: I spent a lot of time as a teenager thinking about building a (feeble) computer with relays. After all, this is essentially a 1-bit memory. I’ve moved on since then … slightly :)