Computing stuff tied to the physical world

IDE w/ LPC824, part 2

In Book on Oct 21, 2015 at 00:01

Let’s get that upload going. Remember, this is about adding a “hardware platform” to the Arduino IDE so it can compile and upload files to a Tinker Pico, based on the LPC824 µC.

There are two parts to this: 1) getting all the IDE setup files right so that it knows how to compile & upload, and 2) implementing pinMode(), digitalWrite(), etc. so they can be used with LPC824 microcontrollers in the same way as with ATmega’s and other µC’s.

So let’s tackle these issues one by one, shall we?

Here’s my very first compile and upload to a Tinker Pico:


(For comments, visit the forum area)